oomph Namespace Reference

Classes
class	AxisymmetricDerivatives
	Class that establishes the surface derivative functions for AxisymmetricInterfaceElements. These are defined in a separate class so that they can be used by other interface equation-type classes. More...
class	AxisymmetricVolumeConstraintBoundingElement
	Axisymmetric (one-dimensional) interface elements that allow the application of a volume constraint on the region bounded by these elements. The volume is computed by integrating x.n around the boundary of the domain and then dividing by three. The sign is chosen so that the volume will be positive when the elements surround a fluid domain. More...
class	BoundingElementType
	This policy class is used to associate specific bounding elements with specific FluidInterface elements. It must be filled in for every class that uses the SpineUpdateFluidInterface<...> or ElasticUpdateFluidInterface<....> generic template classes. Examples for our default Line, Axisymmetric and Surface types are included below. More...
class	BoundingElementType< ElasticUpdateFluidInterfaceElement< FluidInterfaceElement, AxisymmetricDerivatives, ELEMENT > >
class	BoundingElementType< ElasticUpdateFluidInterfaceElement< FluidInterfaceElement, LineDerivatives, ELEMENT > >
	Define the BoundingElement type associated with the 1D surface element. More...
class	BoundingElementType< ElasticUpdateFluidInterfaceElement< FluidInterfaceElement, SurfaceDerivatives, ELEMENT > >
class	BoundingElementType< ElasticUpdateFluidInterfaceElement< SurfactantTransportInterfaceElement, AxisymmetricDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< FluidInterfaceElement, AxisymmetricDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< FluidInterfaceElement, LineDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< FluidInterfaceElement, SurfaceDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< SurfactantTransportInterfaceElement, AxisymmetricDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< SurfactantTransportInterfaceElement, LineDerivatives, ELEMENT > >
class	BoundingElementType< SpineUpdateFluidInterfaceElement< SurfactantTransportInterfaceElement, SurfaceDerivatives, ELEMENT > >
class	ElasticAxisymmetricFluidInterfaceElement
	Specialise the Elastic update case to axisymmetric equations. More...
class	ElasticAxisymmetricSurfactantTransportInterfaceElement
	Specialise to the Axisymmetric geometry. More...
class	ElasticAxisymmetricVolumeConstraintBoundingElement
	The axisymmetric (one-dimensional) interface elements that allow imposition of a volume constraint specialised for the case when the nodal positions of the bulk elements are treated as solid degrees of freedom. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (2D axisymmetric) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	ElasticLineFluidInterfaceBoundingElement
	Pseudo-elasticity version of the LineFluidInterfaceBoundingElement. More...
class	ElasticLineFluidInterfaceElement
	Specialise the elastic update template class to concrete 1D case. More...
class	ElasticLineVolumeConstraintBoundingElement
	The one-dimensional interface elements that allow imposition of a volume constraint specialised for the case when the nodal positions of the bulk elements are treated as solid degrees of freedom. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (2D cartesian) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	ElasticPointFluidInterfaceBoundingElement
	Pseudo-elasticity version of the PointFluidInterfaceBoundingElement. More...
class	ElasticSurfaceFluidInterfaceElement
	Specialise Elastic update case to the concrete 2D case. More...
class	ElasticSurfaceVolumeConstraintBoundingElement
	The Two-dimensional interface elements that allow the application of a volume constraint specialised for the case when the nodal positions of the bulk elements are treated as solid degrees of freedom. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (3D Cartesian) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	ElasticUpdateFluidInterfaceElement
	Generic Elastic node update interface template class that can be combined with a given surface equations class and surface derivative class to provide a concrete implementation of any surface element that uses elastic node updates. More...
class	FluidInterfaceAdditionalValues
	This policy class is used to allow additional values to be added to the nodes from new surface equations, for examples of usage see the SurfactantTransportFluidInterfaceElements. The use of this class avoids issues with calling virtual functions in constructors and avoids having a global look-up able, although it functions in much the same way. Typically, this will only be filled in by "expert users" and is only required if you want to write generic surface-element classes. Specific classes can always be overloaded on a case-by-case basis. More...
class	FluidInterfaceAdditionalValues< FluidInterfaceElement >
	Specific policy class for the FluidInterfaceElemetnts, which do not require any additional values at the nodes. More...
class	FluidInterfaceAdditionalValues< SurfactantTransportInterfaceElement >
	============================================================================= This is the policy class for the surfactanttransport equations which require one additional value for the surface concentration More...
class	FluidInterfaceBoundingElement
	Base class for elements at the boundary of free surfaces or interfaces, used typically to impose contact angle boundary conditions. The elemental dimensions are one less than those of the surface elements, or two less than those of the original bulk elements. Thus in two-dimensional and axi-symmetric problems, are points, but in three-dimensional problems, they are lines. These boundaries may be in contact with a solid surface, in which case the normal to that surface must be provided. More...
class	FluidInterfaceElement
	Base class establishing common interfaces and functions for all Navier-Stokes-like fluid interface elements. Namely, elements that represent either a free surface or an interface between two fluids that have distinct momentum-like equation for each velocity component. More...
class	LineDerivatives
	Class that establishes the surface derivative functions for LineElements. These are defined in a separate class so that they can be used by other interface equation-type classes. More...
class	LineFluidInterfaceBoundingElement
	Specialisation of the interface boundary constraint to a line. More...
class	LineVolumeConstraintBoundingElement
	One-dimensional interface elements that allow the application of a volume constraint on the region bounded by these elements. The volume is computed by integrating x.n around the boundary of the domain and then dividing by two. The sign is chosen so that the volume will be positive when the elements surround a fluid domain. More...
class	PointFluidInterfaceBoundingElement
	Specialisation of the interface boundary constraint to a point. More...
class	SpineAxisymmetricFluidInterfaceElement
class	SpineAxisymmetricSurfactantTransportInterfaceElement
	Specialise to the Axisymmetric geometry. More...
class	SpineAxisymmetricVolumeConstraintBoundingElement
	The axisymmetric (one-dimensional) interface elements that allow imposition of a volume constraint specialised for the case when the nodal positions of the bulk elements are adjusted using Spines. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (2D axisymmetric) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	SpineLineFluidInterfaceBoundingElement
	Spine version of the LineFluidInterfaceBoundingElement. More...
class	SpineLineFluidInterfaceElement
class	SpineLineSurfactantTransportInterfaceElement
	Specialise to the Line geometry. More...
class	SpineLineVolumeConstraintBoundingElement
	The one-dimensional interface elements that allow imposition of a volume constraint specialised for the case when the nodal positions of the bulk elements are adjusted using Spines. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (2D cartesian) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	SpinePointFluidInterfaceBoundingElement
	Spine version of the PointFluidInterfaceBoundingElement. More...
class	SpineSurfaceFluidInterfaceElement
class	SpineSurfaceSurfactantTransportInterfaceElement
	Specialise to surface geometry. More...
class	SpineSurfaceVolumeConstraintBoundingElement
	The Two-dimensional interface elements that allow the application of a volume constraint specialised for the case when the nodal positions of the bulk elements are adjusted using spines. To enforce that a fluid volume has a certain volume, attach these elements to all faces of the (3D Cartesian) bulk fluid elements (of type ELEMENT) that bound that region and then specify the "pressure" value that is traded for the constraint. More...
class	SpineUpdateFluidInterfaceElement
	Generic Spine node update interface template class that can be combined with a given surface equations class and surface derivative class to provide a concrete implementation of any surface element that uses spines. More...
class	SurfaceDerivatives
	Class that establishes the surface derivative functions for SurfaceInterfaceElements (2D surfaces in 3D space) These are defined in a separate class so that they can be used by other interface equation-type classes. More...
class	SurfaceVolumeConstraintBoundingElement
	Two-dimensional interface elements that allow the application of a volume constraint on the region bounded by these elements. The volume is computed by integrating x.n around the boundary of the domain and then dividing by three. The sign is chosen so that the volume will be positive when the elements surround a fluid domain. More...
class	SurfactantTransportInterfaceElement
	Generic surfactant transport equations implemented independently of the dimension and then specialised using the generic mechanisms introduce in the FluidInterfaceElements. More...
class	VolumeConstraintBoundingElement
	Base class for interface elements that allow the application of a volume constraint on the region bounded by these elements. The elements must be used together with the associated VolumeConstraintElement which stores the value of the target volume. Common functionality is provided in this base for storing the external "pressure" value that is traded for the volume constraint. More...
class	VolumeConstraintElement
	A class that is used to implement the constraint that the fluid volume in a region bounded by associated FaceElements (attached, e.g., to the mesh boundaries that enclose a bubble) must take a specific value. This GeneralisedElement is used only to store the desired volume and a pointer to the (usually pressure) freedom that must be traded for the volume constraint. More...